Hi
I'm a newcomer to Linux Lite. Stepped in at version 2.2 64bit.
My hardware is a Lenovo Thinkpad T430:
Additional info:
Wondering if someone here already has experience in setting up this particular machine.
Meaning:
*Thinkfan software (so it's quiet when doing nothing in particular and revs higher only after 55'C degrees Celsius) and so thinkfan starts automatically with the system
*Free-fall sensor (getting it to work correctly)
*Setting up Pulseaudio to have Noise Cancellation for the Mic
*Setting up pulseaudio to have DisplayPort audio visible in pavucontrol
*Setting up powermanagement to be as efficient as possible to have longer batterylife / Maybe someone knows TLP well here, because I've used it on other Distros so far, but I don't know the nifty specific stuff for it on a ThinkPad
*How to set up all the FN keys and special function keys to work ( ThinkVantage button, Mic Mute button )
*How to optimize Intel HD 4000 graphics ( so no tearing occurs and graphics memory can ramp up to maximum specified )
*How to optimize HDD / scheduler / hdparm etc.
*How to set the right display color profile (ICC)
*How to start Intel CPU Microcode with the system
*How to set up the Synaptics Touchpad with all it's functions
*And how to get bluetooth and 3g modem properly to work
*And maybe something else that I'm missing
Thank you in advance and nice Distro,
vaikus84
I'm a newcomer to Linux Lite. Stepped in at version 2.2 64bit.
My hardware is a Lenovo Thinkpad T430:
Code:
cpu@0 processor Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz
memory 32KiB L1 cache
memory 256KiB L2 cache
memory 3MiB L3 cache
memory 32KiB L1 cache
memory 4GiB System Memory
memory 2GiB SODIMM DDR3 Synchronous 1600 MHz (0,6 ns)
memory 2GiB SODIMM DDR3 Synchronous 1600 MHz (0,6 ns)
memory 128KiB BIOS
pci@0000:00:00.0 bridge 3rd Gen Core processor DRAM Controller
pci@0000:00:02.0 display 3rd Gen Core processor Graphics Controller
pci@0000:00:14.0 bus 7 Series/C210 Series Chipset Family USB xHCI Host Controller
pci@0000:00:16.0 communication 7 Series/C210 Series Chipset Family MEI Controller #1
pci@0000:00:19.0 eth0 network 82579LM Gigabit Network Connection
pci@0000:00:1a.0 bus 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2
pci@0000:00:1b.0 multimedia 7 Series/C210 Series Chipset Family High Definition Audio Controller
pci@0000:00:1c.0 bridge 7 Series/C210 Series Chipset Family PCI Express Root Port 1
pci@0000:02:00.0 generic MMC/SD Host Controller
pci@0000:00:1c.1 bridge 7 Series/C210 Series Chipset Family PCI Express Root Port 2
pci@0000:03:00.0 wlan0 network Centrino Advanced-N 6205 [Taylor Peak]
pci@0000:00:1c.2 bridge 7 Series/C210 Series Chipset Family PCI Express Root Port 3
pci@0000:00:1d.0 bus 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1
pci@0000:00:1f.0 bridge QM77 Express Chipset LPC Controller
pci@0000:00:1f.2 storage 7 Series Chipset Family 6-port SATA Controller [AHCI mode]
pci@0000:00:1f.3 bus 7 Series/C210 Series Chipset Family SMBus Controller
scsi0 storage
scsi@0:0.0.0 /dev/sda disk 320GB ST320LT007-9ZV14
scsi@0:0.0.0,1 /dev/sda1 volume 3905MiB EXT4 volume
scsi@0:0.0.0,2 /dev/sda2 volume 294GiB Extended partition
/dev/sda5 volume 5858MiB Linux swap / Solaris partition
/dev/sda6 volume 28GiB Linux filesystem partition
/dev/sda7 volume 259GiB Linux filesystem partition
scsi1 storage
scsi@1:0.0.0 /dev/cdrom disk DVD RW AD-7740H
power 45N1001
wwan0 network Ethernet interfaceAdditional info:
Code:
[ 22.182] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4000
[ 22.182] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx
[ 22.182] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 22.182] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 22.182] (==) intel(0): RGB weight 888
[ 22.182] (==) intel(0): Default visual is TrueColor
[ 22.182] (**) intel(0): Framebuffer tiled
[ 22.182] (**) intel(0): Pixmaps tiled
[ 22.182] (**) intel(0): "Tear free" disabled
[ 22.182] (**) intel(0): Forcing per-crtc-pixmaps? no
[ 22.182] (II) intel(0): Output LVDS1 has no monitor section
[ 22.183] (--) intel(0): found backlight control interface acpi_video0 (type 'firmware')
[ 22.183] (II) intel(0): Output VGA1 has no monitor section
[ 22.183] (II) intel(0): Output HDMI1 has no monitor section
[ 22.183] (II) intel(0): Output DP1 has no monitor section
[ 22.183] (II) intel(0): Output HDMI2 has no monitor section
[ 22.183] (II) intel(0): Output HDMI3 has no monitor section
[ 22.183] (II) intel(0): Output DP2 has no monitor section
[ 22.183] (II) intel(0): Output DP3 has no monitor section
[ 22.183] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 22.183] (--) intel(0): Output LVDS1 using initial mode 1600x900 on pipe 0
[ 22.183] (--) intel(0): Output DP1 using initial mode 1920x1080 on pipe 1
[ 22.183] (==) intel(0): DPI set to (96, 96)
[ 22.183] (II) Loading sub module "dri2"
[ 22.183] (II) LoadModule: "dri2"
[ 22.183] (II) Module "dri2" already built-in
[ 22.183] (II) UnloadModule: "modesetting"
[ 22.183] (II) Unloading modesetting
[ 22.183] (II) UnloadModule: "fbdev"
[ 22.183] (II) Unloading fbdev
[ 22.183] (II) UnloadSubModule: "fbdevhw"
[ 22.183] (II) Unloading fbdevhw
[ 22.183] (II) UnloadModule: "vesa"
[ 22.183] (II) Unloading vesa
[ 22.183] (==) Depth 24 pixmap format is 32 bpp
[ 22.183] (II) intel(0): SNA initialized with Ivybridge (gen7, gt2) backend
[ 22.183] (==) intel(0): Backing store enabled
[ 22.183] (==) intel(0): Silken mouse enabled
[ 22.183] (II) intel(0): HW Cursor enabled
[ 22.183] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 22.184] (==) intel(0): DPMS enabled
[ 22.184] (II) intel(0): [DRI2] Setup complete
[ 22.184] (II) intel(0): [DRI2] DRI driver: i965
[ 22.184] (II) intel(0): [DRI2] VDPAU driver: i965
[ 22.184] (II) intel(0): direct rendering: DRI2 Enabled
[ 22.184] (==) intel(0): hotplug detection: "enabled"
[ 22.184] (--) RandR disabled
[ 22.187] (II) SELinux: Disabled on systemCode:
Core i5-3320m @ 2.6GHz, 4GB DDR3, 320GB Sata HDD, DVDRW, 14,1" HD+ LED 1600x900, Intel HD4000 video, WiFi N-6205, BlueTooth, 3G WWAN H5321gw, Lenovo Smartcard reader, Webcam, mini-DisplayPort, VGA, 2x USB 3.0, 1x USB, SD/MMC Card Reader , Fingerprint ReaderWondering if someone here already has experience in setting up this particular machine.
Meaning:
*Thinkfan software (so it's quiet when doing nothing in particular and revs higher only after 55'C degrees Celsius) and so thinkfan starts automatically with the system
*Free-fall sensor (getting it to work correctly)
*Setting up Pulseaudio to have Noise Cancellation for the Mic
*Setting up pulseaudio to have DisplayPort audio visible in pavucontrol
*Setting up powermanagement to be as efficient as possible to have longer batterylife / Maybe someone knows TLP well here, because I've used it on other Distros so far, but I don't know the nifty specific stuff for it on a ThinkPad
*How to set up all the FN keys and special function keys to work ( ThinkVantage button, Mic Mute button )
*How to optimize Intel HD 4000 graphics ( so no tearing occurs and graphics memory can ramp up to maximum specified )
*How to optimize HDD / scheduler / hdparm etc.
*How to set the right display color profile (ICC)
*How to start Intel CPU Microcode with the system
*How to set up the Synaptics Touchpad with all it's functions
*And how to get bluetooth and 3g modem properly to work
*And maybe something else that I'm missing
Thank you in advance and nice Distro,
vaikus84
Nice, fast working distro so far 
![[Image: X5qGkCg.png]](http://imgur.com/X5qGkCg.png)
![[Image: 0op1GNe.png]](http://i.imgur.com/0op1GNe.png)
![[Image: LgJ2mtP.png]](http://i.imgur.com/LgJ2mtP.png)
![[Image: vLZcFUE.png]](https://imgur.com/vLZcFUE.png)
![[Image: lrUHro3.jpg]](http://i.imgur.com/lrUHro3.jpg)
