See the Security and Bug Fixes Section - Grub EFI Install Updates Fix Sticky


Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
system initialization with error: ata2: COMRESET failed (errno=-16)
#15
Quote:
Code:
[quote author=firenice03 link=topic=9032.msg59901#msg59901 date=1671589924]

Disk /dev/sda: 1,82 TiB, 2000398933504 bytes, 3907029167 sectors
Disk model: Ultra Slim PL   
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt
Disk identifier: 9B3432E5-83D6-4B4E-A233-89E34D845695

Device      Start        End    Sectors  Size Type
/dev/sda1      40     409639     409600  200M EFI System
/dev/sda2  411648 3907028991 3906617344  1,8T Microsoft basic data


Disk /dev/sdb: 298,09 GiB, 320072933376 bytes, 625142448 sectors
Disk model: Hitachi HTS54323
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x0b75e36e

Device     Boot   Start       End   Sectors   Size Id Type
/dev/sdb1          2048   1050623   1048576   512M  b W95 FAT32
/dev/sdb2  *    1050624   2101247   1050624   513M ef EFI (FAT-12/16/32)
/dev/sdb3       2103294 625141759 623038466 297,1G  5 Extended
/dev/sdb5       2103296 625141759 623038464 297,1G 83 Linux

Looking at your fdisk...
LL is running on the Hitachi - assuming the USB drive.
sdb1 - is a left over non needed...
sdb2/3/5 are the EFI and LL "/" partitions
*Most likely as [member=5916]trinidad[/member] mentioned taking a moment to read the disk...

sda1 - EFI partition on the internal hard disk
sda2 - Windows partition; I'd assume C: due to the size... but??

Have you FULLY installed LL on to the computer (using the install process)? or are you still testing the Live Environment - aka booted the iso? or are you using the USB with persistence?
- If you dont know what I mean... Thats ok...
My assumption is you attempted to install LL and inadvertently installed onto the USB drive...

If we think this is the case - no worries we can get you back around and install onto the hard drive.

If you have any files you want to keep - back those up else where.

The Hitachi is the computer's hd. On usb I have Seagate (backup).
Ow .. have a windows partition? But I don't have windows anymore...
Yes, I completely installed the LL, I installed it through .iso with an usb .. but the usb is kept for safety, I read somewhere that it is good to keep it.

Ahhhh, did I install LL on the USB? I just restarted without the external hd (usb) and it started LL normally. What a scare! But no, I did not install the LL on the usb.  :022:
"It's not just the fish that dies by mouth."
Reply


Messages In This Thread
Re: system initialization with error: ata2: COMRESET failed (errno=-16) - by emil - 12-21-2022, 11:06 AM

Forum Jump:


Users browsing this thread: 1 Guest(s)