06-19-2015, 09:16 PM
Howdy rokytnji:
Here is the output from the inxi -Fxx command.
System: Host: hp-desktop Kernel: 3.13.0-24-generic x86_64 (64 bit, gcc: 4.8.2)
Desktop: Xfce 4.11.8 (Gtk 2.24.23) dm: lightdm Distro: Ubuntu 14.04 trusty
Machine: Mobo: N/A model: MS-7139 version: 2.0 Bios: Phoenix version: 6.00 PG date: 02/11/2006
CPU: Dual core AMD Opteron 180 (-MCP-) cache: 2048 KB flags: (lm nx sse sse2 sse3) bmips: 3999.52
Clock Speeds: 1: 1000.00 MHz 2: 1000.00 MHz
Graphics: Card: VIA K8M890CE/K8N890CE [Chrome 9] bus-ID: 01:00.0 chip-ID: 1106:3230
X.Org: 1.15.1 drivers: openchrome (unloaded: fbdev,vesa) Resolution: [email protected]
GLX Renderer: Gallium 0.4 on llvmpipe (LLVM 3.4, 128 bits) GLX Version: 2.1 Mesa 10.1.3 Direct Rendering: Yes
Audio: Card: VIA VT8233/A/8235/8237 AC97 Audio Controller
driver: snd_via82xx port: f200 bus-ID: 00:11.5 chip-ID: 1106:3059
Sound: Advanced Linux Sound Architecture ver: k3.13.0-24-generic
Network: Card-1: Ralink RT2561/RT61 802.11g PCI driver: rt61pci ver: 2.3.0 bus-ID: 00:08.0 chip-ID: 1814:0301
IF: wlan0 state: down mac: 78:44:76:be:2d:b7
Card-2: Realtek RTL-8100/8101L/8139 PCI Fast Ethernet Adapter
driver: 8139too ver: 0.9.28 port: f000 bus-ID: 00:14.0 chip-ID: 10ec:8139
IF: eth0 state: unknown speed: 100 Mbps duplex: full mac: 00:19:db:5e:2e:f3
Drives: HDD Total Size: 122.9GB (6.5% used)
1: id: /dev/sda model: Maxtor_6Y120L0 size: 122.9GB serial: Y3J6962E
Partition: ID: / size: 50G used: 7.5G (16%) fs: ext4 ID: swap-1 size: 2.14GB used: 0.00GB (0%) fs: swap
RAID: System: supported: N/A
No RAID devices detected - /proc/mdstat and md_mod kernel raid module present
Unused Devices: none
Sensors: System Temperatures: cpu: 40.0C mobo: N/A
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 163 Uptime: 6 min Memory: 578.6/1748.9MB Runlevel: 2 Gcc sys: 4.8.4
Client: Shell (bash 4.3.11 running in x-terminal-emul) inxi: 1.9.17
I am not sure howto use the generic vesa driver. I willl research it.
Thank you for the assistance.
Robert
Here is the output from the inxi -Fxx command.
System: Host: hp-desktop Kernel: 3.13.0-24-generic x86_64 (64 bit, gcc: 4.8.2)
Desktop: Xfce 4.11.8 (Gtk 2.24.23) dm: lightdm Distro: Ubuntu 14.04 trusty
Machine: Mobo: N/A model: MS-7139 version: 2.0 Bios: Phoenix version: 6.00 PG date: 02/11/2006
CPU: Dual core AMD Opteron 180 (-MCP-) cache: 2048 KB flags: (lm nx sse sse2 sse3) bmips: 3999.52
Clock Speeds: 1: 1000.00 MHz 2: 1000.00 MHz
Graphics: Card: VIA K8M890CE/K8N890CE [Chrome 9] bus-ID: 01:00.0 chip-ID: 1106:3230
X.Org: 1.15.1 drivers: openchrome (unloaded: fbdev,vesa) Resolution: [email protected]
GLX Renderer: Gallium 0.4 on llvmpipe (LLVM 3.4, 128 bits) GLX Version: 2.1 Mesa 10.1.3 Direct Rendering: Yes
Audio: Card: VIA VT8233/A/8235/8237 AC97 Audio Controller
driver: snd_via82xx port: f200 bus-ID: 00:11.5 chip-ID: 1106:3059
Sound: Advanced Linux Sound Architecture ver: k3.13.0-24-generic
Network: Card-1: Ralink RT2561/RT61 802.11g PCI driver: rt61pci ver: 2.3.0 bus-ID: 00:08.0 chip-ID: 1814:0301
IF: wlan0 state: down mac: 78:44:76:be:2d:b7
Card-2: Realtek RTL-8100/8101L/8139 PCI Fast Ethernet Adapter
driver: 8139too ver: 0.9.28 port: f000 bus-ID: 00:14.0 chip-ID: 10ec:8139
IF: eth0 state: unknown speed: 100 Mbps duplex: full mac: 00:19:db:5e:2e:f3
Drives: HDD Total Size: 122.9GB (6.5% used)
1: id: /dev/sda model: Maxtor_6Y120L0 size: 122.9GB serial: Y3J6962E
Partition: ID: / size: 50G used: 7.5G (16%) fs: ext4 ID: swap-1 size: 2.14GB used: 0.00GB (0%) fs: swap
RAID: System: supported: N/A
No RAID devices detected - /proc/mdstat and md_mod kernel raid module present
Unused Devices: none
Sensors: System Temperatures: cpu: 40.0C mobo: N/A
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 163 Uptime: 6 min Memory: 578.6/1748.9MB Runlevel: 2 Gcc sys: 4.8.4
Client: Shell (bash 4.3.11 running in x-terminal-emul) inxi: 1.9.17
I am not sure howto use the generic vesa driver. I willl research it.
Thank you for the assistance.
Robert